Jouli Crono

CQB class – GREEN
-Maximum power – 1.10 Joule
-BB accepted must have max weight of 0,30g
-MED (Minimum engangement distance) – 1 meter
-All replicas
-Shooting mode: semi / burst / full auto
-Magazines: with maximum 160 bb / mazine

Assault class – BLUE
-Maximum power – 1.65 Joule
-BB accepted must have max weight of 0,50g
-MED (Minimum engangement distance) – 10 meters
-Replicas with minimum length of external barrel 20 cm
-Shooting mode: semi / burst / full auto
-Magazines: with maximum 160 bb / mazine

DMR class – YELLOW
-Maximum power – 2.20 Joule
-BB accepted must have max weight of 0,50g
-MED (Minimum engangement distance) – 20 meters
-Long weapon, minimum length of external barrel: 18 inches / 45.7 cm, without flash hider, shock absorber or barrel extension. Measurement will be done from the ‘front’ of the mag to the end of the external barrel, or to the screw thread if it exists.
-Clasic bipod mandatory
-Firing method is single fire, mechanically limited or via mosfet.
-Magazines: with maximum 70 bb / mazine
-It is mandatory to use optical device on replica.

Sniper class – RED
-Maximum power – 3.30 Joule
-BB accepted must have max weight of 0,60g
-MED (Minimum engangement distance) – 40 meters
-Bolt action ONLY
-Shooting mode: semi-only
-Magazines: with maximum 35 bb / mazine
-It is mandatory to use optical device on replica.

LMG class – BLUE
-Maximum power – 1.65 Joule
-BB accepted must have max weight of 0,50g
-Exemple – M1918BAR; M249; M249PARA; RPK-74; NEGEV; ULTIMAX100; etc.
-MED (Minimum engangement distance) – 20 meters
-Bipod mandatory
-Shooting mode: full auto
-Magazines: DRUM with maximum 5000 bb

HMG class – YELLOW
-Maximum power – 2.20 Joule
-BB accepted must have max weight of 0,50g
-Requires approval from the organizer
-Exemple – PKM; M60D; etc.
-MED (Minimum engangement distance) – 30 meters
-Bipod mandatory
-Shooting mode: full auto
-Magazines: DRUM with maximum 5000 bb

Note:
1. Only replicas of real DMR weapons can be included in the DMR class. Long gun, minimum external barrel length: 18 inches/45.7 cm, not including flashhider, silencer or barrel extension. The procedure for measuring the length of the replica is as follows: the replica is measured from the front of the magazine until the extern barrel ends in one piece. By “barrel in one piece” is meant the outer barrel of the replica that can NOT be in any form detached on the game field.
Exceptions to the 18” rule are replicas that can be used with their standard barrel length from the manufacturer: HK G3A3/SG1, FN FAL, HK G28, HK 417, MOD25.
In this class, only large caliber replicas (eg 7.62) are accepted. Replicas using 5.56 caliber are not accepted in the DMR class. The exception is MK12 SPR MOD0 – the classic version.
The list of accepted DMR replicas will be published on the event page.
2. AK or M4 with long barrel are not considered DMR.
3. “Side weapon” is considered only a replica of a pistol. Conditions: maximum load of 35 balls, shooting mode – recommended single fire. Maximum power allowed -1.1 Joule. Maximum accepted bbl weight-0.30 grams.
4. In order to fit in a class, both conditions must be met: maximum permissible bb power and weight. Example: “A replica to be classified in the” DMR “class must have a power of max. 2.2 Joule and use bb with a maximum weight of 0.50g. ”
5. The maximum allowed rate of fire is 25 bb/sec regardless of the replica class.

Due to the milsim character of the event, only MID / LOW magazines with the maximum allowed capacity for each class and in the maximum number accepted can be used. Hi cap magazines are not allowed. The only exception is the high capacity magazines of the replicas used as support weapons (SAW): box mag or drum mag.

Only plastic or biodegradable airsoft bb with a diameter of 6mm are accepted in the game.
Reloading on the field is strictly forbidden (except mobile points or specially designed areas)!